AIP-VGA2

1/4” CMOS VGA Pan/Tilt Network Camera
25/30fps at VGA, ICR D&N, IR LED, Built-in Pan/Tilt driver

  • 1/4“ CMOS image sensor
  • High-performance TI DaVinci series DSP
  • H.264 video compression and JPEG image capture
  • 25/30fps at VGA/CIF/QVGA/QCIF/QQVGA resolution
  • Dual encoding streams supported
  • Support ICR true Day/Night
  • 2 /1channel alarm IN/OUT(I/O Port cable Extension)
  • Built-in Pan/Tilt driver, support 3D intelligent positioning
  • Built-in high performance IR LEDs(7~10 meters)
  • Built-in 1 channel PIR sensor
  • Max 32GB Hot-swappable SD card for local storage
  • Built-in Web server, NVR, CMS(PSS/DSS) & DMSS


Specifications

General
Processor:	TI DaVinci Series DSP
Operating System:	Embedded LINUX
Resource:	Simultaneous remote monitoring, local recording and remote control
User Interface:	WEB, CMS(DSS/ PSS), DMSS, NVR

Camera
Image Sensor: 1/4” CMOS
Effective Pixels:	640(H)×480(V)
Electronic Shutter:	Auto/Manual, 1/50~1/10000s
Mini. Illumination:	0.5 LUX/F1.8, 0 LUX/F1.8(IR ON)
Signal Noise Ratio:	>50dB
Gain Control:	Auto
White Balance:	Auto
Day/Night:	ICR
Video Format:	PAL/NTSC
Lens: M12-mount , Fixed focal lens, 4.3mm, F1.8
Pan/Tilt:	Horizontal: ±150°, Vertical: -30°~90°

Video
Video Compression:	H.264
Image Resolution:	VGA(640×480) / CIF(352×288/352×240) / QVGA(320×240) / QCIF(176×144/176×128) / QQVGA(160×120)
Encoding Speed::
         Main Stream: VGA/CIF/QVGA/QCIF/QQVGA (1~25/30fps)
		 Extra Stream: VGA/CIF/QVGA/ QCIF/QQVGA(1~25/30fps) 
Bit Rate:	32K~3Mbps
Snapshot:	Fastest 1fps JPEG capture
Video Format: NTSC

Audio
Audio Compression:	PCM(64Kbps) / G.711a(32Kbps)
Input:	1 channel 3.5mm Jack Mic in
Output:	1 channel 3.5mm Jack Speaker out

Network
Ethernet:	RJ-45 (10/100Base-T)
Network Functions:	HTTP, TCP/IP, ICMP, RTSP, RTP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPOE, DDNS, FTP, , Alarm Server
Remote Operation:	Monitor, PTZ control, Playback, System setting, File download, Log information, Maintenance & Upgrade

Auxiliary Interface
SD Card:	Max 32GB, local storage
Alarm I/O:	2/1 alarm in/out
PIR:	I PIR sensor

Environmental
Power Supply:	DC 5V
Power Consumption:	< 3W
IR LED:	7~10 meters
Operating Environment:	-10°C ~ +50°C, 10% ~ 90%
Dimension:	106mm × 102mm × 138mm
Weight: 340g
Mount:	Desktop or Wall

*Above specifications and design subject to change without notification